
How Cooperative Purchasing Contracts Work for Selling to Local Governments
Last updated: November 2026
Quick answer: A cooperative purchasing contract is awarded once, through a competitive solicitation run by a lead agency or cooperative, and other eligible public agencies then buy from it without running their own bid, as long as their own rules allow it. Vendors usually pay the cooperative an administrative fee on sales made through the contract. Winning the award gives you a vehicle, not demand. NationGraph helps you find which agencies buy in your category, when their current contracts end, and who the buyers are, so you know where the vehicle will actually get used.
What is a cooperative purchasing contract?
Selling to local government usually means one procurement per customer. Every city, county, school district and special district runs its own solicitations under its own rules, which turns a territory into hundreds of separate bid cycles. Cooperative purchasing exists to break that pattern.
A cooperative contract is an agreement that one public entity competitively solicits and awards, with pricing and terms that other eligible agencies can use. The lead entity might be a state procurement office, a national cooperative, a regional council of governments or a large agency buying on behalf of others. Because the original award already went through a competitive process, a joining agency can often buy from it instead of running a new bid, where its own laws allow.
For a vendor, that changes the math. One competitive win can open many jurisdictions. But only the agencies that need what you sell, and have budget for it, will ever place an order.
How does piggybacking work?
Piggybacking is the core mechanic. An agency that wants to buy off an existing cooperative contract references the original award, confirms it can use that vehicle under its own rules, and issues its own order against your contract at the contract's pricing and terms. The details depend on the vehicle:
- NASPO ValuePoint: A lead state runs the solicitation and signs a master agreement with the awarded suppliers. Each state then opts in through a participating addendum, a bilateral agreement between the supplier and the participating entity. According to NASPO ValuePoint's buyer FAQ, cities, counties, school districts and other eligible entities can buy through a statewide participating addendum or, where there is none, through a local entity addendum approved by the state's chief procurement official. Without a signed addendum, the supplier FAQ says, a supplier cannot use the contract as a sales vehicle.
- GSA Cooperative Purchasing: GSA's Cooperative Purchasing program lets eligible state and local governments buy IT, security and law enforcement products and services under certain Multiple Award Schedule special item numbers. Many sellers still call these by their legacy names, Schedule 70 for IT and Schedule 84 for security and law enforcement, from before GSA consolidated its schedules. Buyers put the vendor's GSA contract number and special item numbers on the order, and GSA describes its state and local programs as voluntary for both contractors and customers.
- State contracts: Many states open their statewide contracts to local buyers. In Texas, the Texas SmartBuy Membership Program, the new name for the former state cooperative purchasing program, gives cities, counties and school districts access to competitively bid statewide contracts.
Depending on the agency and the dollar amount, a piggyback purchase may still need board or council approval before the order goes out.
What types of cooperative contracts will vendors run into?
- Multistate cooperatives such as NASPO ValuePoint, where a lead state competes the contract for participating states.
- Federal schedules opened to state and local buyers through GSA Cooperative Purchasing.
- State contracts that a state procurement office makes available to local governments.
- National and regional cooperatives such as Sourcewell, OMNIA Partners, TIPS and BuyBoard, which run solicitations across categories and make the awards available to eligible public agencies. Sourcewell, for example, describes itself as a local unit of government under Minnesota statute that competitively solicits and awards contracts.
- Single-agency contracts written with cooperative language so that other agencies can adopt them.
Each vehicle has its own eligibility rules, fee structure and term, and a vendor can hold awards on several at once.
How does a vendor get on a cooperative contract?
- Watch for the solicitation. You usually cannot register your way onto a cooperative contract. NASPO ValuePoint, for example, has no vendor registration or approved vendor list. Suppliers compete in solicitations published through the lead state's eProcurement system and listed on the NASPO ValuePoint site.
- Price in the fee. Cooperatives are commonly funded by a fee on vendor sales. NASPO ValuePoint collects an administrative fee from suppliers based on portfolio sales, with the terms set in each solicitation and master agreement. Build it into your pricing before you bid, not after.
- Respond to the lead agency's RFP. Expect a broader solicitation than a single agency bid, because the award has to work for many buyers across a wide geography.
- Finish the follow-on paperwork. On NASPO ValuePoint that means negotiating participating addenda state by state. On GSA it means choosing to accept state and local orders through Cooperative Purchasing on your schedule contract.
- Market the vehicle. An award sits idle until agencies know it exists and have a reason to use it. Lead with the procurement shortcut: the buyer can get you under contract without running a bid.
How do agencies decide to buy off a cooperative contract?
From the buyer's side, a cooperative contract is a shortcut, not an obligation. Local governments set dollar thresholds above which formal competition is required, and a properly competed cooperative contract is one way to meet that requirement without a new solicitation, where state and local law allow it.
Before using one, a procurement office typically checks that its state permits the vehicle or has signed the needed addendum, that the original solicitation covered what it wants to buy, and that the pricing holds up. When grant money pays for the purchase, the grant's own procurement requirements may apply too. Make that review easy by having the award documents, contract number and pricing ready to send.
What are the pros and cons for vendors?
Pros:
- One competitive win can serve many agencies.
- Shorter sales cycles when a buyer can skip a full RFP.
- Pre-negotiated terms, so less contract negotiation on each deal.
- A clear answer when a prospect asks how they would even buy from you.
Cons:
- Administrative fees on sales through the vehicle.
- Large, demanding solicitations to win the award in the first place.
- Extra work after the award, such as state participating addenda and any reporting those addenda require.
- No guaranteed volume. Agencies remain free to run their own bids instead.
Why doesn't winning the award create pipeline?
A cooperative contract is a channel, not a pipeline. The award gives you the right to sell. It does not tell you which eligible agencies need your product this year, have budget for it, or are watching an incumbent's contract run out.
Agencies tend to buy when a current contract ends or new money arrives. Those moments show up first in public records: budgets and capital plans, board and council minutes, grant awards and purchase orders. If you can see them early, you can work a cooperative award like a territory instead of waiting for agencies to find you. Our guide to pre-RFP data sources covers where to look.
How NationGraph helps
NationGraph is public sector sales intelligence for teams selling to federal, state, local and education buyers. It reads 20M+ SLED data sources across 160,000+ state, local and education institutions, which makes it a practical way to work a cooperative award after you win it.
- See who buys in your category. Search purchase orders to see which agencies bought what you sell, from which vendor, for how much and when. You can search the same records for a cooperative's name or contract number.
- Know when contracts end. NationGraph files public records requests on your behalf, about 10,000 a day across customers, returning contracts with value, start and end dates, pricing and the signed file. Monitors alert you when a contract is expiring. Here is more on tracking expiring government contracts.
- Check whether cooperatives are allowed. Pull an institution's procurement guidelines, including bid thresholds, board rules and whether cooperative contracts are permitted.
- Spot buying triggers. Signals surface budget moves, board votes, grants and expiring contracts, each tied to a specific institution and its source document.
- Reach the buyer. Contacts covers 2M+ verified public sector contacts, from city IT directors to federal contracting officers, with verified emails and direct phone numbers.
- Ask questions in plain English. Compass, NationGraph's AI research assistant, answers questions over public sector records with citations to the source.
Everything syncs two ways with Salesforce and HubSpot, so the agencies you prioritize land in the CRM your team already works.
If you hold or are pursuing a cooperative award, get 10 free pre-RFP opportunities from your territory and see which agencies are already showing intent.
Frequently asked questions
How do cooperative purchasing contracts work for selling to local governments?
A lead agency or cooperative runs one competitive solicitation and awards a contract with set pricing and terms. Other eligible agencies, such as cities, counties and school districts, then buy from that contract instead of running their own bid, as long as their own procurement rules allow it. The vendor competes once, usually pays the cooperative an administrative fee on sales, and then has to find the agencies that need what it sells.
Do local governments have to use a cooperative contract once it exists?
No. Using a cooperative contract is a choice, not an obligation. GSA describes its state and local purchasing programs as voluntary for both contractors and customers, and on NASPO ValuePoint a state or local entity has to opt in through a participating addendum. Many agencies still run their own solicitations for some purchases.
Can any vendor get on a cooperative contract?
Any vendor can compete, but you usually cannot simply register. NASPO ValuePoint, for example, has no vendor registration or approved vendor list, so suppliers have to win a solicitation run by a lead state. Awards are competitive, and you should expect a broader solicitation than a single agency bid.
What fees do vendors pay on cooperative contracts?
Cooperatives are commonly funded by an administrative fee on vendor sales. NASPO ValuePoint collects an administrative fee from suppliers based on portfolio sales, with the terms set in each solicitation and master agreement, while buyers pay no membership fee. Check the fee for each vehicle and build it into your pricing before you bid.
How do I find which agencies are likely to buy off my cooperative contract?
Look for agencies whose current contract is ending or who just got new money: budgets, board and council minutes, grant awards and purchase orders show this first. NationGraph surfaces these signals across 160,000+ state, local and education institutions, files public records requests that return contracts with start and end dates, and gives you verified contacts for the buyers behind each signal.
Find your first opportunity in minutes





