Bel Lido Bridge Rehabilitation

1. Bridge Pier Rehabilitation: Concrete pier encasement (4 piers), concrete patch repair at location(s) identified on plans and epoxy crack repair at location(s) identified on plans. 2. Removal of existing decorative bridge wall cap (EIFS material) and replacement with anchored, precast concrete decorative bridge wall cap. 3. Asphalt milling, asphalt overlay and striping of bridge deck and approaches. 4. Chemical grouting of voids at identified locations at the bridge approach slabs. 5. Cleaning and coating of bridge surfaces, abutment cap, bridge railing and existing utility pipes as indicated on the plans and in the Measurement & Payment item. 6. Removal and reinstallation of existing guardrail (if necessary) to complete the rehabilitation work. 7. Maintenance of Traffic and coordination with the Owner and Engineer during construction. 8. Environmental Protections: a. Contractor is responsible for coordinating and meeting all NPDES and FDEP permit conditions and regulations specifically and including protection of water quality. This includes prohibition of runoff of deleterious material resulting from surface preparation, paint splatter, concrete work, paving, milling, and overlay, etc. and all pollutants resulting from construction activities from being introduced into the waterway during any and all phases of work. b. Contractor is responsible for submitting for an NPDES Notice of Intent (NOI) and Notice of Termination (NOT) as required for construction of the project. 9. Restoration: a. Existing landscaping and other improvements shall be protected during construction. Sod that is damaged during construction shall be replaced at the contractor’s expense. All restoration shall be at the contractor’s expense