Baker Elementary School Roof Replacement

This project consists of: Roofs 01-08 – Removal of granular surfaced modified bitumen cap sheet and base plies down to the lightweight insulating concrete (LWIC) slab. Repair and patch LWIC where required. Proper removal and disposal of any asbestos containing material (ACM) found to be present during testing. Provision of replacement insulated modified bitumen roofing system (vapor barrier, insulation, tapered insulation crickets where applicable, cover board, and multiple ply modified bitumen roofing system) and flashings. Roofs 09-12 – Removal of gravel surfaced built up membranes, roofing insulation, and roofing flashings down to structural metal deck. Provision of replacement insulated modified bitumen roofing system (deck board, vapor barrier, insulation, tapered insulation crickets where applicable, cover board, and multiple ply modified bitumen roofing system) and flashings. Removal and replacement of all sheet metal flashing and trim, coping, thru wall scuppers, and flashings associated with roofing. Removal and replacement of all roof drains. Perform all associated work such as disconnection, removal, reinstallation, and reconnection of existing rooftop mechanical units on replacement curbs/rails so as to achieve minimum 12” high base flashing. All low slope roofing shall be removed and replaced. Work shall be in compliance with applicable codes