25ITBC1430608A-ST Corporation Stops & Brass Fittings

Fulton County, Georgia "County" Acceptable Corporation Stops and Brass Fittings shall be Ford Meter Box Company, Merit Brass, and AY McDonald. 1. All Corporation Stops and Brass Fittings that come in contact with potable water shall conform to AWWA Standard C800, (ASTM B584, UNS C89833 2. All Corporation Stops and Brass Fittings shall be of the ¿NL¿ (No Lead) type fittings, and all corporation stops, and brass fittings shall have the letters NL cast into the main body for lead free identification. 3. All Corporation Stops and Brass Fittings under this ITBC shall be certified to NSF/ANSI standard 61 and NSF/ANSI Standard 372. 4. All Corporation Stops and Brass Fittings under this ITBC that do not come in contact with potable water shall conform to AWWA Standard C800 (ASTM B62and ASTM B584, UNS C83600, 85-5-5-5) 5. The body design for each Corporation Stop and Brass Fitting mentioned in this ITBC shall be designed to provide wrench flats to facilitate installation. 6. The only Corporation Stops and Brass Fittings that will be acceptable will be the ones that are manufactured in the United States. 7. All Vendor(s) will be required to provide a price quote for ALL Corporation Stop and Brass Fittings mentioned in this ITBC based on the specifications listed below. Each vendor must provide a quote on Ford Meter Box Inc. Brass Fittings or an approved equivalent. If any bidder that is supplying or equal item, each bidder must show proof that their item is equivalent by providing documentation, drawings, etc. to show that their item is equivalent. Any bidder that does not submit a bid on all items mentioned, and any vendor that fails to provide proof that their item(s) are equivalent will be deemed as non-responsive